This web site is hosted using solar
energy to power its servers. Hosted by:

Finally a Green Alternative for Underlayment and Backer Board

Green E-Board™ is a better environmental alternative and upgrade to replace gypsum drywall and cement backer boards for walls, floors and counter tops. Meets and exceeds, IRC, ASTM and ANSI

1. Highest flame and smoke rating
2. Water Resistant; not affected by moisture
3. Naturally Mold and Mildew Resistant
4. Sound rated

Guaranteed to not buckle, swell or expand Green E-Board™ can be installed as a finished wall panel by installing smooth side out. Install rough side out for tile installations.

Green E-Board™ is an ecological alternative to gypsum, wood, and cement based building products.

GreenEboard™ is manufactured with a patent pending process and formula, using primary components of magnesium oxide and magnesium chloride. The manufacturing process uses less than 50% of the energy consumed to make a comparable Portland cement based wall board. GreenEboard contains a minimum of 5% transferred post-industrial recycled material, and 100% of our manufacturing post-industrial waste is recycled into future production runs.

No raw materials or scrap materials are ever wasted or put into a landfill. GreenEboard™ may contribute to LEED credits MR8, minimum EQ, EQ 3.1 (EQ plan during construction) and MR4.1, (materials with recycled content).

GreenEboard™ is manufactured in Asia, and shipped to you on large container ships. Research has shown that the carbon footprint of shipping one pallet of GreenEboard to the USA is approximately equivalent to driving the same pallet about 25 miles in a pickup truck to the jobsite.

GreenEboard™ is non-nutrient for fungus when tested under ASTM D3273, because of its high content of magnesium oxide and magnesium chloride. In other words, it naturally will not grow mold or mildew, solving one of the biggest issues of construction in wet areas such as showers and tub surrounds. In addition, GreenEboard™ contains no VOCs or harmful silica, making it safe for the installer as well as the end-user. GreenEboard™ has been successfully used in construction for the chemically sensitive.

GreenEboard™ is waterproof. It will not swell, delaminate, warp, or disintegrate when exposed to a wet environment. Remarkably, GreenEboard™ is also water vapor permeable. This allows GreenEboard™ to be used as a wall-board in construction where breathable walls are specified.

GreenEboard™ received the Class 1 or Class A flame and smoke rating when tested under ASTM E84. This means that it does not contribute fuel to a fire, and does not produce flame or smoke when exposed to fire. In international testing, 1/2” GreenEboard™ has been approved as part of a two hour fire assembly.

GreenEBoard™ is made of proprietary and patent pending technology.

GreenEBoard™ is made of proprietary and patent pending technology. Ingredients include Magnesium Oxide, Magnesium Chloride as the primary components, with additional natural mineral components such as perlite, and woven and non-woven strengthening fibers.

Why Choose GreenEBoard™ for your next tile project?

GreenEBoard™ installs with conventional fasteners and can be scored and snapped with a regular utility knife. Portland cement based backer boards and fiber cement boards require special tools. Conventional screws typically will not countersink into these boards. The installer must buy special screws, or must pre drill the board to achieve countersunk fastener heads. GreenEboard weighs 50% per square foot less than other cement boards, making it easier to handle. Remodelers who have to work in tight spaces especially appreciate GreenEboard’s ease of installation. GreenEboard is non-nutrient for mold and mildew, without added chemicals.

GreenEBoard™ contains NO silica.

GreenEBoard™ contains no harmful silica. Backer boards that contain silica are a health hazard to the installer. Please read our competitor’s warning labels before handling.

GreenEBoard™ will not warp, swell, delaminate or disintegrate when exposed to moisture, unlike gypsum based backer boards. Some gypsum based backer boards are manufactured with a built in vapor barrier to prevent the problem, but if the vapor barrier is compromised, the gypsum will still be affected by the moisture.

When tested under ASTM C-627, GreenEBoard™ received the highest rating of “extra heavy”, meaning it can be installed as a tile backer under the most demanding conditions like food plants, industrial kitchens, and other high impact areas.

GreenEBoard™ is the ideal backer board for tubs, showers, floors, outdoor kitchens, fireplace surrounds receiving stone or brick veneer, and much, much more.

Additional Applications

In addition to using GreenEBoard™ as a tile backer for walls and floors, it can also be used for exterior applications such as soffit cladding, as an exterior sheathing behind stucco applications when structural strength is not required for the exterior sheathing, as an interior or exterior skin for SIP panels, in homes where breathable walls are desired, for fireplace surrounds, as wall board for those who are chemically sensitive, and as a mold resistant and flame rated paneling in mobile and manufactured homes.

Green E-Board™ can be easily installed as a finished wall panel by using the smooth side as a finished wall.

We recommend that you use a good primer as a base coat since it is has an alkaline base and may react to some specialized paints.

MATERIALS NEEDED

Nails: Use appropriate length galvanized nails for the thickness of the Green EBoard™ and the application

Screws: Corrosion-resistant bugle head drywall screws or backerboard screws appropriate for the application

Vapor Barrier when using Green E-Board™ in a wet location

2” glass fiber mesh tape for seams

Standard or Latex Modified Thinset

If applying Green E-Board™ as the finished wall surface, standard or ecologically friendly drywall finishing materials may be used on the joints

TOOLS

Tungstine carbide tipped backer board knife or standard utility knife

Aluminum straight edge or T-ruler

Commercial grade electric screw-gun with variable clutch and adjustable depth guide

EASY TO CUT

Place the straightedge on the board and score once using the backer board knife

Hold the larger piece firmly and put light pressure on the smaller piece until it breaks

For best results, score the back side before snapping the two pieces apart

INSTALL

Steel or wood framing should be spaced no greater than 16” o.c. without blocking, 24” o.c. with blocking when using ½” Green E-Board™. Always follow local building codes

Use a vapor barrier for wet applications

When using Green E-Board™ as an underlayment use a dry-set or latex-cement mortar to bond Green E-Board™ to sub floor.

Fasteners should be spaced 6” o.c. for walls and ceilings for both wood and metal framing. Drive fasteners flush with surface.

Under tile and stone use a 2” 10x10 glass fiber mesh tape embedded in a skim coat of a polymer modified thinset. Caulk or seal joints.

What makes GreenEboard™ Green?

1. Compared to conventional cementitious backer boards, GreenEboard requires less than half the energy to produce, making a much lower carbon impact on the environment.
2. GreenEboard™ weighs less than conventional backer boards, meaning more material can be shipped per truckload, again lowering the carbon footprint.
3. 100% of the post-industrial waste in the GreenEboard™ plant is recycled into future production runs, reducing landfill impact. External recycled content is also added. The total of post-industrial recycled content is certified at 30%. LEED credits accept 50% of post-industrial waste, making the LEED content 15%.
4. GreenEboard™ contains no harmful ingredients such as VOCs, formaldehyde, asbestos, or silica dust, and it will not grow mold or mildew. It contributes to a healthier indoor environment.
5. GreenEboard™ contains no ingredients that are harmful to the planet when it is disposed of. The natural materials in GreenEboard™ scraps are completely inert.

Does GreenEboard™ qualify for LEED or NAHB GreenBuild credits?

GreenEboard™ has been submitted in LEED project documents for contribution to the following LEED credits:

1. MR 4.1 Recycled Content. GreenEboard™ contains a total of 15% recycled materials by LEED formula. 0% is post-consumer, 3% is pre-consumer from outside sources, and 27% is recycled post-manufacture from within the manufacturing process. 3% + 27% = 30% post-industrial. 50% of post-industrial recycled content for LEED purposes is 15% of total material content by volume, and by value.
2. MR 2.1 or 2.2 Construction Waste Management Reduction of waste materials (2.1 = 50% reduction, 2.2= 75% reduction) GreenEboard™ has no toxic components. (SEE MSDS)[hotlink to MSDS download]. The PH of ground-up GreenEboard is between 8.0 and 9.0. This allows it to be used as a soil conditioner. It may be used to improve an acid soil on site or off site. GreenEboard™ scraps are accepted at recycling centers that recycle building materials.
3. Minimum EQ contribution EQ 3.1 Construction Plan for Low-Emitting materials GreenEboard™ contains no silica, no formaldehyde, no asbestos, and is rated under ASTM D3273 as non-nutrient for mold and fungus. It is not harmful for installers, and contributes no harmful substances to the environment.NAHB GreenBuild® credits GreenEboard™ has been used in an award winning
4. NAHB GreenBuild® home. GreenEboard™ may be included in GreenBuild® credits for recycling and recycled content and for innovation in materials.

What face goes up?

Install GreenEboard™ with the rough side exposed for installation of tile on countertops,walls, and floors. Install GreenEboard™ with the smooth side exposed as an underlayment for cork, vct tiles, etc. GreenEboard™ should not be installed under sheet vinyl goods. Check with the manufacturer of the finish floor materials to be sure they are compatible with cementitious underlayments. Download the GreenEboard™ technical guide (pdf) for complete tile installation instructions.

Does GreenEboard™ contain any materials that are harmful?

Dust created by cutting and installation of any construction material can be an irritant to mucous membranes and eyes. Always wear proper safety accessories when installing GreenEboard™. GreenEboard™ contains no harmful ingredients such as VOCs, formaldehyde, asbestos, or silica dust, and it will not grow mold or mildew. It contributes to a healthier indoor environment. GreenEboard™ contains no ingredients that are harmful to the planet when it is disposed of. The natural materials in GreenEboard™ scraps are completely inert.

Where Can I get installation instructions?

Download the GreenEboard™ technical guide (pdf) for complete tile installation instructions.

Does GreenEboard™ have a warranty?

The GreenEboard™ transferable warranty is the strongest in the industry. You can read it or print it here on the GreenEboard™ website.

Can I use GreenEboard as a replacement for drywall?

GreenEboard™ has been successfully used as a replacement for drywall in homes for individuals with MCS (multiple chemical sensitivities) and those seeking an installation that “breathes”. When installing GreenEboard™ as a wallboard, seal the board with a non-toxic penetrating sealer before filling and coating the joints. Fill the joints between boards with nonshrinking, quick drying filling cement. Users report that paper joint tape works better than mesh tape for avoiding hairline cracks. If using earth or lime plasters, test a sealed area of GreenEboard™ for compatibility before proceeding with a complete installation. Do not apply wet plasters to unsealed GreenEboard™. GreenEboard™ is non-combustible and produces no flame or smoke when exposed to fire. (see the GreenEboard™ technical guide for test results) GreenEboard™ does not have “fire ratings” for commercial installations. Check local building codes to ensure compliance before installing GreenEboard™.

Where Can I buy GreenEboard?

GreenEboard is available throughout the United States and Canada.contact us and we will be happy to provide a distributor in your area.

Customer services

Contact us
About Us
Order Tracking
Customer Login

Help & FAQ

Shipping FAQ
Payment FAQ
Cancellations and Returns

Helpful Information

Icons Explained
Sitemap

Links

Site Hosting Servcies
Shopping Cart Software